Compact Track Loader (Rubber Track Skid Steer) Rental

John Deere CT319

Rates Day Week Month
Regular
$350 $1,400
$3,900
Corporate
$335 $1,300
$3,430
Guarantee logo

We honor the lowest rate on all long term rentals

Product Image
Are you looking to rent a Compact Track Loader CTL (Rubber Track Skid Steer) for a commercial or residential project that requires a CTL because it requires you to work in confined areas? If that describes your project, then put some thought to renting a small and agile John Deere CT319.

What's better: Tracks or Tires? In other words, why rent a Compact Track Loader vs. a skid steer?

  • First off, if your project involves hills and slopes with uneven terrain or various surfaces that have mud, loose gravel, or extra soft or soggy ground, then a Compact Track Loader (Rubber Track Skid Steer) will always win the day over a skid steer. This is to a CTL's superior stability in the areas mentioned above (All the situations whereby a skid steer with tires would spin out and get stuck...).
  • When you consider that the tracks on a Compact Track Loader distribute the loader's weight evenly (at 4.8 psi), then it becomes apparent that it is vital to minimize ground pressure if you are concerned about damage to the surfaces you're working on.
  • And point number three is short but vital: no flat tires!
Strong and mighty
The 319D comes equipped with a 5 cylinder turbo engine that delivers 68 HP. This is helpful for carrying heavy loads. In fact, you can carry loads of up to 1900 lbs with a 319D. (The 319D's Tipping Load is 5600 lbs, vs. 4,412 for the CT315.)
Easy to navigate
Productivity and safety are of concern to everyone, so it's good to know that a 319D provides Industry-leading 360-degree visibility.
Superior bucket angle
The 40-degree dump angle allows the bucket to empty all content (including sticky material).
Comfortable for long shifts
The CT319's sculptured high back seat will help you keep productivity high.
What type of jobs can a John Deere CT319 Compact Track Loader (Rubber Track Skid Steer) rental handle?
  • Backfill trenches
  • Dig trenches
  • Prepare grounds for landscaping
  • Snow removal
  • Remove debris from construction sites
  • Fence pole installation
  • Sod removal
  • Clear land and load rubbish bins
  • Plant trees
  • Remove stumps
  • Load pickup trucks, hoppers and spreaders
  • Grade and level driveways1
  • Load sand and gravel
  • Brush cutting
We have a reputation for providing quick delivery on a wide range of skid steer rentals, mini-excavator rentals, and compact track loader (Rubber Track Skid Steer) rentals throughout the Lower Mainland of Greater Vancouver and the Fraser Valley: Vancouver, Burnaby, Poco, Port Coquitlam, Port Moody, Surrey, White Rock, Langley, New Westminster, Delta, Coquitlam, Ladner, Tsawwassen, Richmond, North Vancouver, West Vancouver, Pitt Meadows, Maple Ridge, Mission, Abbotsford. See our Delivery rates for more details.

Engine

Emission Rating Interim Tier 4 / EU Stage 3B
Engine Make / Engine Model John Deere / PowerTech E 4024HT
Net Power, kW (hp) @ Rated rpm 47.1 (63) @ 2300
Gross Power, kW (hp) 50.8 (68)
Net Peak Torque, N-m (lb-ft) 230 (170)
Displacement, L (cu in) 2.4 (149)
Engine Aspiration Turbo. intercooled
Fuel Capacity, L (gal) 70 (90)

Hydraulic System

Standard Pump Flow, L/min (gpm) 59 (15.5)
Optional High Flow, L/min (gpm) not published
System Pressure, kPa (psi) 21370 (3100)
Hydraulic power, kW (hp) 22.4 (30)
Optional high flow hydraulic power, kW (hp) not published

Performance

SAE Rated Operating Capacity, kg (lb) 863 (1900)
Tipping Load, standard, kg (lb) 2542 (5600)
Breakout Force Boom, kN (lb) 15.8 (3500)
Breakout Force Bucket, kN (lb) 23.2 (5125)
Vertical lift geometry Yes

Drive Train

Maximum Ground Speed, standard, kph (mph) 9.8 (6.1)
Two Speed Transmission Ground Speed, kph (mph) not published
Standard Rubber Track Width mm (in) 320 (21.6)
Ground Pressure, Standard Track, kPa (psi) 37.2 (5.4)
Track Guage, center to center, mm (in) 1500 (59.1)

Dimensions

Length with Bucket, mm (in) 3360 (132)
Length Without Bucket, mm (in) 2740 (108)
Width Without Bucket, mm (in) 1820 (72)
Height to ROPS, mm (in) 2000 (79)
Height to Hinge Pin, mm (in) 3000 (118)
Dump Height, mm (in) 2400 (95)
Dump Reach, mm (in) not published
Dump Angle, degrees 42
Bucket Rollback @ ground, degrees 32
Ground Clearance, mm (in) 250 (9.8)
Angle of Departure, degrees 25

Weight

SAE Operating Weight, kg (lb) 3882 (8550)

Give Us a Call